C Technologies Mobile Information Collector C-Pen - Manual (Page 49)

49
3. Several words are read. The words are shown on a new
screen where you can select the words to be translated/
looked up, see Word selection screen, p. 51.
4. A dialog box appears, telling you that the word
cannot be found in the dictionary.
When you are reading a word, the word (or part of the word)
in front of and/or behind the accurate word might also be
included. If this is the case C Dictionary acts according to
the following rules:
• If two words are read, the longest word is translated.
• If three words are read, the middle word is translated.
• If more than three words are read, the Word selection
screen is displayed, see next page.
Word edit box
The word/s you have read are directed to an edit box where
you can edit them in the usual way.
1. To be able to edit the word/s you have to close the
dialog boxes, lists or screens that might have been
opened after reading.
2. The edit box will already be selected. Press Nav and a
cursor will indicate that you are in edit mode.
3. Press Nav again to open the Edit menu or use C Write
to edit the word.
4. When you have finished editing, select Done in the
Edit menu or press ESC.
5. The edited word will now be looked up in the
dictionary.