C Technologies Mobile Information Collector C-Pen - Manual (Page 56)

56
Beam Settings
• Recieving files
Select the language of the file you are beaming to C-
Pen.
• Always send as Unicode
If enabled, all files will be sent in the Unicode
standard.
• Cancel
Return to Settings.
C Write Feedback
Check the check box if you want to enable/disable the
visual feedback facility in C Write.
Calibration
The Calibration option increases C-Pen’s reading ability
if the text is not black, if the background is not white, or if
the text quality is poor. During the calibration process,
C-Pen will find the appropriate balance of black and white
for the particular surface. If your C-Pen reads poorly, try to
calibrate it. However, the default settings should be able to
cope with most cases.
Calibration overrides the factory settings. The calibrated
setting is not saved when C-Pen is turned off. If you want to
revert to the factory setting without turning C-Pen off,
select
C
alibration in Settings and then Calibrate. Select
DEFAULT SETTING
in the dialog box.
Inverted (negative) text must be reset in Text Quality.