C Technologies Mobile Information Collector C-Pen - Manual (Page 72)

72
program also enables you to view Tutorial videos, which
demonstrate how to use C-Pen for best results. Click the
file you want to read.
To install C-Win Software (C-Win):
1. Put the C-Pen CD into your PC’s CD-ROM drive and the
installation program will start automatically. If installa-
tion does not start, click the Start button/Run and type
x:\cpen.exe, where x: denotes the CD-ROM drive.
2. To install C-Win, click Software installation.
When C-Win is installed, the installation of C-Win com-
munication settings (IR and/or cable) starts. If you have
a C-Pen with a cable connection, you can choose to com-
municate by IR, cable or both. Please follow the in-
structions.
Infrared drivers might already be installed on your PC.
The installation program will tell you if this is the case.
Infrared hardware on laptops can be configured in many
different ways. Please follow the instructions in the in-
stallation program. If you have questions about IR com-
munication, please click the Start button/Programs/C-
Pen/Troubleshooting or go to www.cpen.com/support
and click on Troubleshooting, or contact your laptop
retailer or manufacturer.
Connecting C-Pen to a PC by IR
To connect C-Pen to your PC, position C-Pen so that it is
aligned with the PC’s IR port as shown in the figure.