Turn signal control, Lights – FORD 2012 F-250 User Manual

Page 91

Advertising
background image

5. Locate the vertical adjuster on
each headlamp, then use a #2
Phillips head to turn the adjuster
either counterclockwise (to adjust
down) or clockwise (to adjust up)
aligning the upper edge of the light
pattern up to the horizontal line.

6. Repeat Steps 3–5 for the other
headlamp.

7. Close the hood and turn off the lamps.

TURN SIGNAL CONTROL

The turn signal lever does not mechanically lock in the upward or
downward position when activated. The turn signal control activation and
cancellation is electronic.
• To operate the left turn signal,

push the lever down until it stops
and release.

• To operate the right turn signal,

push the lever up until it stops
and release.

• To manually cancel turn signal operation, push the lever again in

either direction.

Lane change

To indicate a left or right lane change:
• Push the lever up/down to the first stop position and release. The turn

signals will flash three times and stop.

• Push the lever up/down to the first stop position and hold. The turn

signals will flash for as long as the lever is held in this position.

Lights

91

2012 F-250/350/450/550 (f23)
Owners Guide, 4th Printing
USA
(fus)

Advertising
This manual is related to the following products: