Interior lamps, Front map lamps (if equipped), Bulb replacement – FORD 2012 F-250 User Manual

Page 92: Lamp assembly condensation, Lights

Advertising
background image

INTERIOR LAMPS

Front map lamps (if equipped)

The map lamps are located on the overhead console. Press the controls
on either side of each map lamp to turn on the lamps. The map lamps
also light when:
• any door is opened,
• the instrument panel dimmer

switch is rotated up until the
courtesy lamps come on, and

• any of the remote entry controls

are pressed and the ignition is
off.

Rear dome/map lamps

Your vehicle may have map lamps
within the rear dome lamp. Press
the switches on either side of the
dome lamp to turn the lamps on.

BULB REPLACEMENT

Lamp assembly condensation

Exterior lamps are vented to accommodate normal changes in pressure.
Condensation can be a natural by-product of this design. When moist air
enters the lamp assembly through the vents, there is a possibility that
condensation can occur when the temperature is cold. When normal
condensation occurs, a thin film of mist can form on the interior of the
lens. The thin mist eventually clears and exits through the vents during
normal operation. Clearing time may take as long as 48 hours under dry
weather conditions.

Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens

Lights

92

2012 F-250/350/450/550 (f23)
Owners Guide, 4th Printing
USA
(fus)

Advertising
This manual is related to the following products: