Futaba 2PL - Manual (Page 20)

18
Reference
Reference
Ratings
Transmitter
T2PL
(2 channels, AM transmitter)
Transmitting frequency:
27, 29, 40, 41, 72 or 75 MHz
Modulation method: AM
Power requirement:
12V (penlight battery X 8)
Current drain: 250mA
Receiver R142JE
(2 channels, AM receiver)
Receiving frequency:
27, 29, 40, 41, 72 or 75 MHz
Intermediate frequency: 455kHz
Power requirement: 4.8 - 6V
Current drain: 12mA (at No signal)
Size: 41.9X28X16.9mm
Weight: 16.7g
Servo
S3003
(standard servo)
Power requirement:
4.8V or 6V (common with receiver)
Current drain: 8mA (at 6V / Idle)
Output torque: 3.2kg-cm (at 4.8V)
Operating speed: 0.23sec/60 degree (at 4.8V)
Size: 40.4x19.8x36mm
Weight: 37.2g
E.S.C. MC230CR / MC330CR
(Electronic speed control)
Operating system: Forward, reverse, and brake
operations are all linear.
Power requirement: Nicd battery 6-7 cells
7.2 to 8.4V
PWM frequency: 1.5kHz (fixed)
Setting: One-touch input by pushbutton switch.
Set data is saved to built-in EEPROM.
Current capacity (FET rating):
Forward=90A/200A, reverse=45A/100A
Case size: 27.1x33.3x12.8mm
(excluding protruding parts)
Silicon cord gauge size:
AWG16/AWG14 equivalent
Weight: 44/45g
(including connectors and switches)
BEC voltage: 6.0V
*Specifications and ratings are subject to change without prior notice.
75 MHz Band: (car/boat only)
75.410 61
75.610 71 75.810 81
75.430 62 75.630 72 75.830 82
75.450 63 75.650 73 75.850 83
75.470 64 75.670 74 75.870 84
75.490 65 75.690 75 75.890 85
75.510 66 75.710 76 75.910 86
75.530 67 75.730 77 75.930 87
75.550 68 75.750 78 75.950 88
75.570 69 75.770 79 75.970 89
75.590 70 75.790 80 75.990 90
Frequencies (for U.S.A.)
The following frequencies and channel numbers may
be used for surface use in the United States: