Futaba 4VF - Manual (Page 10)

BEFORE USE
NAME AND HANDLING OF EACH PART
TRANSMITTER T4VF (FRONT PANEL)
Operates the instructor transmitter when
using the trainer function. The student
transmitter can be operated only while
this switching is being pressed.
Displays the transmitter battery voltage.
When the needle deflects to the boundary
between the silver and red zones, re-
charge or replace the battery.
Trainer switch Level meter
Antenna
Servo reversing switches
Switches that reverse the direction of operation of the servos.
The lower position is the normal side and the upper position is the
reverse side.
Operating direction display
REV.: Reverse side
NOR: Normal side
Channel display
AIL.: Aileron (CH1)
ELE.: Elevator (CH2)
THR.: Throttle (CH3)
RUD.: Rudder (CH4)
OUTPUT
POWER
WORLD LEADING MANUFACTURER OF R/C
SERVO REVERSER
AIL. ELE. THR. RUD.
REV.
NOR.
O N
Hook
Carrying bar
Elevator trim lever
(Mode 1)
Throttle trim lever
(Mode 2)
Elevator (Mode 1)
Throttle (Mode 2)
/ rudder stick
Rudder trim lever
Power switch
In the upper position, the
power is turned on.
Aileron trim lever
Throttle (Mode 1)
Elevator (Mode 2)
/ Aileron stick
Throttle trim lever
(Mode 1)
Elevator trim lever
(Mode 2)