Futaba 4VF - Manual (Page 19)

USING OTHER FUNCTIONS
CHARGING THE NICD BATTERY
WARNING
Never plug the special charger
into an AC outlet other than speci-
fied.
If the charger is plugged into an AC outlet
other than specified, overheating, spark-
ing, etc, may cause burns, fire, etc.
Use the special charger, or digital
proportional R/C quick charger,
sold separately to charge the digi-
tal proportional R/C nicd battery.
Overcharging will cause burns, fire, in-
jury, or blindness due to overheating,
breakage, electrolyte leakage, etc.
CAUTION
When not using the nicd battery
charger, disconnect it from the AC
outlet.
CHARGING THE NICD
BATTERY
The transmitter and receiver nicd bat-
teries scan be charged simultaneously
or independently.
1
Connect the charger transmit-
ter connector to the transmitter
charging jack and the charger re-
ceiver connector to the receiver
servo nicd battery.
2
Connect the charger to a
110VAC outlet.
3
Check that the charging LED
light.
4
At the end of charging, discon-
nect the charger from the AC out-
let.
Charger
Receiver nicd battery
To transmitter charging jack
(Nicd battery system only)
RX:Receiver charging display
TX:Transmitter charging display