Futaba 6YF User Manual
Page 11
12
B
EFORE
U
SE
The transmitter and receiver nicd batteries scan be charged simultaneously or indepen-
dently.
1
Connect the charger transmitter connector to the transmitter charging jack
and the charger receiver connector to the receiver servo nicd battery.
2
Connect the charger to an AC outlet.
3
Check that the charging LED ilght.
4
At the end of charging, disconnect the charger from the AC outlet.
When not using the nicd battery charger, disconnect it from the AC outlet.
Charging the Nicd Battery
Never plug the special charger into an AC outlet other than specific voltage.
If the charger is plugged into an AC outlet other than specific voltage, overheating,
sparking, etc, may cause burns, fire, etc.
Use the special charger, or digital proportional R/C quick charger, sold separately
to charge the digital proportional R/C nicd battery.
Overcharging will cause burns, fire, injury, or blindness due to overheating, breakage,
electrolyte leakage, etc.
Do not charge a dry battery.
A dry battery may be charged and cause overheating or breakage and electrolyte leakage
and result in burns or damage by chemical mater.