Name and handling of each part, Efore, Transmitter t6yf (front panel) – Futaba 6YF User Manual

Page 9

Advertising
background image

10

B

EFORE

U

SE

<Channel display>
1 :Aileron (CH1)
2 :Elevator (CH2)
3 :Throttle (CH3)
4 :Rudder (CH4)
5 :Landing gear (CH5)
6 :Flap (CH6)

<Operating direction display>
REV :Reverse side
NOR :Normal side

Name and Handling of Each Part

Transmitter T6YF (Front Panel)

ON

DIGITAL PROPORTIONAL R/C SYSTEM

HIGH

LOW

THROTTLE CONTROL

SERVO FUNCTION

POWER

THROTTLE

ATV

SERVO

REVERSER

NARROW BAND TECHNOLOGY

FUTABA FLIGHT COMFORT

CH.6

FLAP

GEAR

CH.5

TRAINER

Trainer switch

Voltage indicator

Antenna

Carrying handle

Elevator trim
lever(Mode 1)

Throttle trim
lever(Mode 2)

Elevator(Mode 1)

Throttle(Mode 2)
/Rudder stick

Throttle trim lever

(Mode 1)
Elevator trim lever
(Mode 2)

Throttle(Mode 1)
Elevator(Mode 2)
/Aileron stick

Aileron trim lever

Power switch

Neck strap

hook

Rudder trim

lever

Servo reversing switches

Power switch: Turns the trnsmitter on or off. In the upper position, the power is turned
on.

Voltage indicator: This is an expanded scale voltmeter. It is not calibrated in volts.
When the needle deflects to the boundary between the silver and red zones, recharge or
replace the battery. Do not operate the transmitter if the needle falls down to the red area.

Antenna: Never operate the transmitter without extending this antenna or you may create
interference to other modelers. This antenna is not intended to be removable.

Aileron, Elevator, Throttle and Rudder stick: Control each function. See page 14 for a
transmitter operation instruction.

Aileron, Elevator, Throttle and Rudder trim: Used to shift the neutral or idle position
of the each servo. As the throttle stick is moved forward towards the high throttle posi-
tion, the throttle trim will have less effect.

Carrying handle: Provides an easy means of transporting the transmitter.

Neck strap hook: Clip the neck strap only to this hook when neck strap use is required.

Servo reversing switches: Switches that reverse the direction of operation of the servos.
The lower position is the normal side and the upper position is the reverse side.

Landing gear switch

Flap knob

Throttle ATV trimmers

Crystal

Advertising