Futaba GY501 - Manual (Page 29)

30
A
SSEMBLY AND
A
DJUSTMENT
Mounting the Gyro Sensor
The gyro sensor is extremely sensitive to vibrations. Always use the
attached sensor tape to mount the gyro sensor. Stick the sensor tape
to the center of bottom of the sensor and firmly stick the sensor to a
flat part of the helicopter frame so that it does not touch the frame.
Mount the sensor so that the bottom of the sensor is level with the
rotating surface of the tail.
Always use the attached sensor tape to mount the gyro sensor.
Always reinstall the sensor tape if it has started to separate or tear.
Do not get fuel, waste oil, etc. on the gyro sensor.
The special paint may dissolve.
Gyro Sensor
Sensor Tape
Flat part