Futaba GY701 - Manual (Page 66)

G
YRO
E
XPERT
S
ETTING
66
(4) Rudder exponential
default: -60% (F3C-AVCS), -40% (F3C-Normal), -20% (3D-
AVCS), -20% (3D-Normal)
ranges: -100%
+100%
This sets the feeling of the rudder control. De-
creasing the rate to minus, the rudder control is
softer, and is quicker when the value is increased
to plus side. Pushing the data+ or – key, the value
is changed.
(5) Rudder delay mode
default: Function
This selects the rudder delay mode either Func-
tion or Constant. The Function mode will have the
rudder control feel softer. The Constant mode has
the linear and quick motion of the rudder. Select
by pilot preference.
(6) Control delay In
default: F3C=12, 3D=15
ranges: 0
20
This sets the rudder control delay of moving to
right or left from neutral side. It adjusts left and
right individually. Adding to the value, the control
feeling will be mild. Pushing data+ or – key, the
value is changed.