Futaba GY701 - Manual (Page 77)

G
OVERNOR
E
XPERT
S
ETTING
77
This sets the delay of the revolution from high to
low. Pushing data+ or – key, the value is changed.
(9) Start delay
default: 5
range: 2 20
This sets the delay during the starting of the
governor. Pushing data+ or – key, the value is
changed.
(10) Low limit at hovering
default: 25 %
range: 0 80 %
This sets the throttle low limit during hovering
revolution to avoid too lean a carburetor. Pushing
data+ or – key, the value is changed.
(11) Low limit at idle up
default: 45 %
ranges: 10
80 %
This sets the throttle low limit during idle up
revolution to avoid too lean a carburetor. Pushing
data+ or – key, the value is changed.
(12) Governor data reset