Cisco 12 SP+ - Manual (Page 18)

Chapter 42 Cisco IP Phone Configuration
Configuring Cisco IP Phones
42-18
Cisco CallManager Administration Guide
78-13310-01
Idle Enter the URL to display on the Cisco IP Phone 7960
and Cisco IP Phone 7940 LCD when the phone has not
been used for the time specified in Idle Timer field. For
example, you can display a logo on the LCD when the
phone has not been used for 5 minutes.
Leave this field blank to accept the default setting.
Cisco CallManager only displays this field for
Cisco IP Phone 7960 and 7940 models.
Idle Timer (seconds) Enter the amount of time (in seconds) that you want to
elapse before the URL specified in the Idle field displays.
Leave this field blank to accept the default setting.
Cisco CallManager only displays this field for
Cisco IP Phone 7960 and 7940 models.
Authentication
Server Enter the URL the phone uses to validate requests made
to the phone web server. If you do not provide an
authentication URL, the advanced features on the 7960
and 7940 that require authentication will not function.
By default, this URL accesses a Cisco IP Phone User
Options pane configured during installation.
Leave this field blank to accept the default setting.
Table 42-1 Phone Configuration Settings (continued)
Field Description