Cabletron Systems EMC38-12 - Manual (Page 15)

EMC38-12 USER’S GUIDE Page 2-1
CHAPTER 2
INSTALLATION
This chapter explains how to install the EMC38-12 in a 19-inch rack and
also provides requirements for installing the EMC38-12 on a tabletop or
shelf.
2.1 UNPACKING THE EMC38-12
Unpack the EMC38-12 as follows:
1. Remove the shipping box material covering the EMC38-12.
2. Carefully remove the EMC38-12 from the shipping box.
3. Remove the EMC38-12 from its non-conductive bag. If you notice any
signs of damage, contact Cabletron Systems Technical Support
immediately.
2.2 INSTALLING THE EMC38-12
You can install the EMC38-12 in a 19-inch rack or place it on any
horizontal surface (e.g. a table or shelf). Cabletron provides an accessory
kit with the EMC38-12 that includes Rack Mount Brackets and Mounting
Screws.
The following sections provide instructions for installing the EMC38-12.
Select one of the following subsections and perform the steps that are
applicable to your installation needs.