3 connecting the emc38-12 to the power source – Cabletron Systems EMC38-12 User Manual
Page 18
Advertising
CHAPTER 2:
INSTALLATION
Page 2-4
EMC38-12 USER’S GUIDE
2.3
CONNECTING THE EMC38-12 TO THE POWER
SOURCE
Note
: The EMC38-12 has a universal power supply. This allows you to
connect the EMC38-12 to power sources from 100 Vac to 125 Vac,
50-60 Hz. or 200 Vac to 240 Vac, 50-60 Hz.
To connect the EMC38-12 to the power source:
1. Plug the power cord into the back panel of the EMC38-12.
2. Plug the other end of the power cord into a grounded wall outlet.
3. Verify that the
PWR
LED
is on, this indicates that the EMC38-12 is
receiving power.
Advertising