HONDA 1984 Accord Sedan - Owner's Manual - Manual (Page 517)

516
uu Replacing Light Bulbs u Front Turn Signal/Side Marker Light Bulbs
Main
tenan
ce
Front Turn Signal/Side Marker Light Bulbs
When replacing, use the following bulbs.
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips and screw, and
pull the inner fender back.
3. Turn the socket to the left and remove it.
4. Push in the old bulb, rotate to the left until
it unlocks, and remove.
5. Insert a new bulb.
Side Turn Signal/Emergency Indicator Light Bulbs *
Door mirrors have the side turn lights. Have an authorized Honda dealer inspect and
replace the light assembly.
Front Turn Signal/Side Marker Light: 24/2.2 CP (Amber)
1 Front Turn Signal/Side Marker Light Bulbs
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Central pin
Push until the
pin is flat.
Holding Clip
Screw
Bulb
Socket
* Not available on all models