HONDA 1984 Accord Sedan - Owner's Manual - Manual (Page 80)

79
uu Indicators u
Continued
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:On the left: Models with information display
On the right: Models with multi-information display
Indicator Name On/Blinking Explanation Message *2
Lane Departure
Warning (LDW)
Indicator
*
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off.
● Comes on if there is a problem with
the LDW system.
● Stays on constantly - Have the vehicle
checked by a dealer.
● Blinks when your vehicle is too close
to the lane lines. The beeper sounds.
● Blinks while driving - Take
appropriate action to keep your vehicle
within the lane lines.
— —
● Comes on when the LDW system
shuts itself off. ● Stays on - The temperature inside the
LDW camera is too high.
The system activates when the
temperature inside the camera cools
down.
2 LDW Camera P. 461
● Stays on - The area around the camera
is blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
● Have your vehicle checked by a dealer if
the indicator and message come back
on after you cleaned the area around
the camera.
2 LDW Camera P. 461
Models with information display
* Not available on all models