HONDA 1984 Accord Sedan - Owner's Manual - Manual (Page 69)

68
In
strum
e
nt Pa
nel
Indicators
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message *
Parking Brake
and Brake
System Indicator
(Red)
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off if the parking
brake has been released.
● Comes on when the parking brake
is applied, and goes off when it is
released.
● Comes on when the brake fluid
level is low.
● Comes on if there is a problem
with the brake system.
● The beeper sounds and the
indicator comes on if you drive
with the parking brake not fully
released.
● Comes on while driving - Make sure
the parking brake is released. Check the
brake fluid level.
2 What to do when the indicator
comes on P. 560
● Comes on along with the ABS
indicator - Have the vehicle checked by a
dealer.
2 If the Brake System Indicator (Red)
Comes On P. 560
Brake System
Indicator
(Amber)
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off.
● Comes on if there is a problem
with a component related to
braking.
● Stays on constantly - Have the vehicle
checked by a dealer.
U.S.
Canada
(Red)
U.S.
Canada
(Amber)
* Not available on all models