IC Realtime 3Mp Full HD Network PTZ Dome Camera (ICIPP3020HD) - Manual (Page 20)

20
Pull the cable through the steeve and then secure the steeve to the flange. Fix the M4 bolt.
Please note, if the speed dome is installed in the outdoor environments, you need to paste
enough Teflon tape at the top screw thread of the steeve and then turn the steeve to the flange
firmly. Please paste the silica gel on the steeve connection surface to do the waterproof work.
See Figure 4-4.
Figure 4-4
Please draw four holes position in the wall according to the hole of the bottom of the wall mount
bracket. Then you can dig four holes and insert the expansion bolts (not provided). . Use four
hex but and flat washer to fix the bracket in the expansion bolts. See Figure 4-5.
Figure 4-5
Please refer to chapter 1.2 for detailed installation information.
Teflon tape
M4 bolt
Silica gel
Long pole Without pole