ILY SATA DVD/CD Duplicator Controller - Manual (Page 16)

2. Disc => Image: Transfers the information from the master DVD/CD to the HDD. After the
image(s) transfer is complete, the reader drive is ejected and the source drive is changed to
the HDD.
Press
ENT
Note: The Source Disc may be placed in the Reader Drive or any of the Writer Drives.
The source disc loaded to
HDD as file IMG_0001.
3. Image Info: Shows the image number in sequential order, the file name of the image stored
on the HDD, the type of image stored, and the amount of data the image contains (in MB for
DVD or time for CD).
Press
ENT
DVD disc image of
4,372MB as file IMG_0003
CD disc image of 17 tracks
as file IMG_0001
or to select image and
press ENT to display info
4. Rename Image: Renames the image instead of using default file names (A001, A002, etc.).
Up to 8 characters.
Press
ENT
Select the image file to be
renamed and press ENT
Press ENT to
confirm
or to select character.
Press ENT to go to the
next position.
Or press ESC to
change the name
There are 8 characters for each image name. No empty space allowed in the image file name.
Press ESC to cancel the process.
5. Delete Image: Deletes the image(s) from the HDD and reclaims the space occupied by the image
on the HDD.
14