ILY SATA DVD/CD Duplicator Controller - Manual (Page 6)

9 UTILITY
9.1 Pre-scan
Performs a scan on the master disc before the copy process starts and
ensures the master disc can be copied in the duplicator.
9.2 Quick Erase
Erases content on the media (CD-RW, DVD+/-RW and DVD+/-RW DL).
9.3 Full Erase
Erases all data on the media (CD-RW, DVD+/-RW and DVD+/-RW DL).
9.4 Eject All Trays
Ejects all disc trays, including source drive.
9.5 Disc Info.
Displays basic information of the discs inserted, such as disc type, amount of
data on disc for master disc(s) (in MB) and media book type. For blank media,
displays the media book type, available space and speed of the media.
9.6 Drive Info.
Displays information of all drives in the duplicator including the Reader, HDD (if
present) and Writer drive(s).
9.7 System Info.
Displays the duplicator controller information, such as the hardware version,
buffer memory and currently loaded firmware.
9.8 Update BIOS
Updates the firmware for the controller.
9.9 Copy Counter
Shows count. Enables counter and clears counter.
10 SETUP
10.1 Startup Menu
Assigns a command to be displayed first after the duplicator has been initialized.
10.2 Auto Start
Sets auto start time from OFF (no auto start) to 99 sec. Allows the duplicator to
automatically start one of six following functions once the master disc and
10.3 Display Mode
10.4 Beep
Sets the amount of information displayed on the LCD during the performance
of various functions.
Enables or disables the audio feedback when buttons are pressed.
10.5 Power on Eject
Allows the duplicator to eject disc tray(s) with disc present inside upon boot-up.
10.6 Reader Speed
Sets the speed at which discs are read during various processes.
10.7 Compare Speed
Sets the speed at which the compare process is executed.
10.8 Skip Read Error
Enables the option to halt the duplication process if there is an error on the
master disc. Disables the option to allow the process to continue with the same
errors as the master disc.
10.9 Language
Allows different language selections for LCD display.
10.10 Clear Setup
Clears the CMOS and resets the duplicator controller back to factory defaults.
4