ILY DaisyChian DVD/CD Duplicator Manual - Manual (Page 14)

13
10.3 Full Erase
This operation will erase re-writable discs in the Writer Tray. It is timelier than Quick
Erase function. When finished, the writer will automatically eject the trays.
Insert re-writable disc and press ENT
Erasing finished and eject discs
10.4 Eject All Discs
Ejects disks, including master source disc and discs in writer trays.
Press ENT Eject all discs
10.5 Disc Info
This feature allows checking disc’s basic information, such as the disc type, data
length, and available capacity.
press ENT
10.6 Drive Info
This feature allows checking the duplicator’s major component information, such as
its manufacturer, Writer or Reader model number and version.
a. Press ENT and then press up or down to check each Drive’s model number and
information.
b. The duplicator will assign each drive a number from #1to#12. #1 is Reader. #2~#12
are writers.
press ENT
press
, to select different Drives
10.7 System Info
This feature provides information about the duplicator, such as the controller model
number, RAM capacity, and Firmware version
press ENT
press , to select different Drives
10.8 Update BIOS
When manufacturer’s certified update CD is inserted, this operation will
automatically update your duplicator’s software.
a. Turn on the duplicator select 10. Utility, and press ENT,
b. Insert an update CD to any Drive
c. Select 8. Update BIOS and press ENT
d. The system will then start executing the firmware update. When finished, the
updated CD will automatically eject.
e. In 1 min, the system will re-boot. The new firmware update is complete.
Insert update CD
[Utility]
3. Full Erase
Full Erase Disc
_O _ _ _ O_o
[Utility]
4. Eject All Disc
[Utility]
5. Disc Info
[1] 79:59
CD-R Use 27:53
[Utility]
6. Drive Info.
[#1] Port 8.0 3.38
DVD-ROM Max 16 X
[Utility]
7. System Info.
P762NDVD 1.26
[Utility]
8. Update BIOS
Upgrade BIOS
Waiting Disc………