ILY DaisyChian DVD/CD Duplicator Manual - Manual (Page 8)

7
11.9 Setup Password Allows setting or changing the password for Setup.
11.10 Reader Speed Allows you to set the maximum read speed of the reader
11.11 Compare
Speed
Allows you to set the maximum speed during the compare
function.
11.12 CHG Bad
Master
This function allows the user to replace the master at mid burn if an
error occurs from reading the master disc.
11.13 CD Overburn Allows copying of certain CDs that have been over burned during
its creation.
11.14 Clear Setup Resets all settings back to manufacturer’s default.
12. IMAGE
MANAGER
Contains various Hard Drive related operations. If duplicator does
not have HDD installed, the system menu will not show this function.
12.1 Select Image Used to select an Image file as a Source to be copied to the discs.
12.2 Disc -> Image Used to copy a Source Disc to HDD to save as an Image file
12.3 Reader Speed The following function (12.2 Disc -> Image function), will allow you
to set the Reading Speed of the master source disc.
12.4 Image Info. Checks the image file information and file size
12.5 Rename Image This function renames the HDD image partition’s name.
12.6 Delete Image Deletes an image file in HDD. If the file is selected as the source file,
you will not be able to delete it unless you go back to 12.1 to re-
select the image.
12.7 HDD Info. Checks the information in HDD, such as the number of discs stored
on the HDD and the amount of space left in the HDD
12.8 Format HDD This feature will allow you to format the HDD. However, if HDD
image was selected as the source you will not be able to format it.
13. Link Setup
13.1 Set MyPosition This function sets the position of the tower within the chain.
13.2 Start Link Executes the linking process.
13.3 Update BIOS Upgrades the controller firmware to all linked towers.
13.4 Synchron-BIOS Synchronizes the controller firmware of all linked towers to the
firmware of the first tower.