ILY DaisyChian DVD/CD Duplicator Manual User Manual
Page 22
21
13. LINK SETUP
To access this menu use the
until you arrived at 13. Link Setup, and then press ENT
Note: If no Hard Drive is present in the tower, this function will default to 12. Link
Setup.
13.1 Set MyPosition
This function will allow you to set the position of the tower within the chain.
a. Select 13. Link Setup and press ENT
b. At 1.Set My Position and press ENT
c. Press
,
to select between First Tower, Middle Tower, Last Tower, or Stand-alone.
Press ENT
13.2 Start Link
This function allows you to start the linking process. Linking process also
automatically starts when the duplication towers are first power on.
a. Select 13. Link Setup and press ENT press
b. Select 2. Start Link and press ENT
13.3 Update BIOS
This function allows you to upgrade the firmware of all the towers in the chain
Note: It requires a firmware CD that contains .bin firmware file to work. Contact the
duplicator manufacturer to obtain the update file.
a. Select 13. Link Setup and press ENT press
b. Insert a certified firmware upgrade disc in the reader.
c. Select 3. Update BIOS and press ENT
13.4 Synchron-BIOS
This function allows you to synchronize the firmware version from the first tower to all
the towers in the chain.
Note: It requires a firmware CD that contains .bin firmware file to work. Contact the
duplicator manufacturer to obtain the update file.
a. Select 13. Link Setup and press ENT press
b. Select 4. Synchron-BIOS and press ENT
c. Data will begin moving from the first tower to the subsequent towers.
[Link Setup]
1. Set MyPosition
[Link Position]
== > First
[Link Setup]
2. Start Link
Start LINK …..
[Link Setup]
3. Update BIOS
Upgrade BIOS
Waiting Disc …..
[Link Setup]
4. Synchron-BIOS
Move Data [02713]