Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 119)

-119-
4.2.65.45 lacp
Command:
lacp
lacp
Enable LACP on this interface
Default:
Disabled
Usage Guide:
To enable LACP for specific interface
Example:
To enable LACP for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp
4.2.65.46 lacp key
Command:
lacp key
<1-65535> | auto
lacp
Enable LACP on this interface
key
Key of the LACP aggregation
<1-65535>
Key value
auto
Choose a key based on port speed
Default:
Auto
Usage Guide:
To configure LACP key for specific interface
Example:
To configure LACP key (555) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp key 555