Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 254)

-254-
4.2.141 mep <Instance> peer-mep-id
Command:
mep <Instance>
peer-mep-id <mepid> [ mac <mac> ]
mep Maintenance Entity Point
<Instance>
The MEP instance number.
peer-mep-id
The peer MEP-ID
<Mepid : uint>
The peer MEP-ID value
mac
The peer MAC. this will be overwritten by any learned MAC – through CCM reception.
<Mac : mac_addr>
The peer MAC string
Default:
None
Usage Guide:
To configure Peer MEP-ID of MEP.
Example:
To configure Peer MEP-ID of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 peer-mep-id 0 mac 11-3A-05-A1-53-11
4.2.142 mep <Instance> performance-monitoring
Command:
mep <Instance>
performance-monitoring
mep Maintenance Entity Point
<Instance>
The MEP instance number.
performance-monitoring
Performance monitoring Data Set collection (MEF35)
Default:
Disabled
Usage Guide:
To enable Performance Monitoring of MEP.
Example:
To enable Performance Monitoring of MEP 1