Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 154)

-154-
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust tag
4.2.65.109 rmon collection history
Command:
rmon collection history <1-65535> buckets <1-65535> interval <1-3600>
rmon
Configure Remote Monitoring on an interface
collection
Configure Remote Monitoring Collection on an interface
history
Co nfigure history
buckets
Requested buckets of intervals. Default is 50 buckets
interval
Interval to sample data for each bucket. Default is 1800 seconds
Default:
N/A
Usage Guide:
To configure RMON History Configuration for specific interface
Example:
To configure RMON History Configuration as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # rmon collection history 1 buckets 5 interval 3