Interlogix NS3550-8T-2S User Manual - Manual (Page 456)

User’s Manual of NS3550-8T-2S
456
6.26 Ethernet Virtual Connections Command
EVC Configuration
Description:
Show EVC configuration.
Syntax:
EVC Configuration [<port_list>] [<policer_id>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<policer_id> : Policer ID (1-128)
EVC Port DEI
Description:
Set or show port DEI mode.
Syntax:
EVC Port DEI [<port_list>] [<dei_mode>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<dei_mode> : DEI mode: coloured|fixed
EVC Port Tag
Description:
Set or show port tag match mode.
Syntax:
EVC Port Tag [<port_list>] [<tag_mode>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<tag_mode> : Tag mode: inner|outer
EVC Port Addr
Description:
Set or show port address match mode.
Syntax:
EVC Port Addr [<port_list>] [<addr_mode>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<addr_mode> : IP/MAC address mode: source|destination
EVC Port L2CP
Description:
Set or show port L2CP mode
Syntax:
EVC Port L2CP [<port_list>] [<l2cp_list>] [<mode>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<l2cp_list> : L2CP ID list (0-31). BPDU range: 0-15, GARP range: 16-31
<mode> : The mode takes the following values:
normal : Default forwarding
forward : Forward
redirect : Redirect to CPU