5 auto-negotiation – Interlogix NS3550-8T-2S User Manual User Manual
Page 479
Advertising
User’s Manual of NS3550-8T-2S
479
7.5 Auto-Negotiation
The STP ports on the Industrial Managed Switch have built-in “Auto-negotiation”. This technology automatically sets the
best possible bandwidth when a connection is established with another network device (usually at Power On or Reset). This
is done by detect the modes and speeds at the second of both device is connected and capable of, both 10Base-T and
100Base-TX devices can connect with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in
Full-duplex mode.
Advertising