Interlogix TVC-6120-1 User Manual - Manual (Page 16)

14 TruVision TVC-6110-1 / TVC-6120-1 Camera User Manual
Set the camera ID
In the Setup menu, go to Camera ID and press Enter to display the menu. The
camera ID displayed on-screen can have up to 40 characters.
Camera ID input line
Command line
To enter a character, move the cursor to the desired character and press Enter to
select it. It appears in the input line. Repeat the process until all characters are
entered.
To move the character input position in the input line, move the cursor in the
command line to
← or → and press Enter.
To clear the input line, move the cursor to CLR and press Enter.
To delete a character in the input line, select the character so that it blinks. Then
move the cursor to CLR on the command line and press Enter.
To position the camera ID on-screen, move the cursor to POS and press Enter.
The menu will then disappear on-screen and the camera ID will be displayed on
the monitor. Use the menu button to move the camera ID to the desired position.
Press Enter. The menu will reappear. Select Return to return to the previous
menu.
Set sync mode
Use the Sync menu to select the synchronization mode. Only one option is
available: Internal.