Interlogix UVD-EVRDNR - Manual (Page 13)

Figure 10: DC Lens menu
Table 2 below describes the menu items in the DC Lens menu.
Table 2: DC Lens menu description
Menu item Description
Iris level Press Left or Right to adjust the level for autoiris lens to control light
entering camera (for DC type). Ranging from 0 to 10..
Av:Pk This is the average-to-peak (Av:Pk) setting for AE mode. The default
setting is 8:4.
Shutspeed Adjust the shutter speed to 1/60 NTSC (1/50 PAL), 1/100, 1/250, 1/500,
1/1000, 1/2,000, 1/5000, or 1/10000 sec. Select a higher value to see
movement and a lower value to see clearer images.
3. Press Up or Down to select an item.
4. Press Left or Right to adjust the Av:Pk value on the DC iris lens after level setting.
Av. value. The electronic convergence is automatically adjusted for the average
photometric method with the average video signal level of the object as the right
photometric value.
Pk. value. The electronic convergence is automatically adjusted for the peak
photometric method with the peak video signal level of the object as the right
photometric value.
Variation range: 0:12, 1:11, 2:10, 3:9, 4:8, 5:7, 6:6, 7:5, 8:4, 9:3, 10:2, 11:1, 12:0
Manual exposure menu
To access the ME (manual exposure) menu, do the following:
1. Move the cursor on the Setup menu (Figure 6 on page 9) to Light Cntl and press
left or right to cycle between the DC LENS and ME (Figure 11 below).
Figure 11: Light control menu selection – ME
UVD-EVRDNR(-P) Camera User Manual 11