Interlogix UVD-EVRDNR - Manual (Page 8)

OSD control pad
The onscreen display (OSD) control pad (Figure 4) is a five-direction joystick that
provides the ability to manually control the camera functions. Table 1 below lists the
OSD control pad functions and describes their use.
Figure 3: OSD control pad
OSD control pad
Table 1: OSD control pad functions
Pad directions Description
Up Moves the cursor upward to select an item.
Left Moves the cursor left to select or adjust the parameters of the selected item.
Right Moves the cursor to the right to select or adjust the parameters of the selected
item.
Down Moves the cursor downward to select an item.
Enter Press the center of the control pad to display the Setup menu. If the selected
item has its own menu, press the control pad to enter a submenu. Press the
control pad for 2 seconds to save all settings and exit the Setup menu.
Installation
Complete all the necessary programming before you install the camera. This chapter
provides information on how to install the camera and adjust camera angle and
focus.
Installation overview
To install the camera you will need to prepare the mounting surface, make cable
connections, and mount the camera.
6 UVD-EVRDNR(-P) Camera User Manual