Defining a recording schedule – Interlogix TruVision IP Open Standards Box User Manual User Manual

Page 34

Advertising
background image

3BChapter 4: Configuring the camera

Parameter Description

Frame rate

Specifies the frame rate for the selected resolution.

The frame rate is the number of video frames that are shown or sent per
second. Default value is 25 (PAL)/ 30 (NTSC).

I frame interval

A video compression method. It is strongly recommended not to change
the default value displayed: 25.

Multicast address

Specifies a D-class IP address between 224.0.0.0 to 239.255.255.255.
You do not need to specify this option if you are not using the multicast
function. Some routers prohibit the use of multicast function in case of a
network storm. The default value is 0.0.0.0.

RTSP port

Specifies the RSTP port. The default value is 554.

Video encoder type

Specifies the video encoder used.

Options include: H2.64 and MPEG4

Defining a recording schedule

You can define a recording schedule for the camera in the “Schedule record”
screen. The recording is saved on to the SDHC card in the camera. Although all
recordings are saved on a DVR, the camera’s SDHC card provides a backup in
case of network failure, for example.

The selected recording schedule applies to all alarm types.

You will be prompted to reboot the camera after making any schedule
modifications.

Post-event recording times

The post-event record time is used if you have the motion detection and/or
external alarms enabled. When an external or motion alarm is cleared, the
camera will continue recording based on the value specified in this option.
Options include: 5 (default), 10, 30 seconds, 1, 2, 5, and 10 minutes.

To define a recording schedule:

1. In the “Channel parameters” folder click the

Schedule record

subfolder to

open its screen.

2. Click the

Enable Recording

box to enable recording.

Note:

To disable recording, deselect the option.

3. Select the post record time from the drop-down list.

4. Select whether the recording will be for the whole week (All day recording) or

for specific days of the week (Section recording).

30

TruVision IP Cam Open-Standards User Manual

Advertising