Interlogix TVE Series - Manual (Page 21)

TVE-400/800-1600 H.264 IP Video Encoder User Manual 17
2. Click General and enter the required settings:
Option Description
NIC type Network interface card (NIC) is a device used to connect the
DVR to a network. Select the NIC type used from the drop-down
list.
Default value is 10/100/1000M self-adaptive.
Enable DHCP Check this box if you have a DHCP server running and want
your encoder to automatically obtain an IP address and other
network settings from that server.
Default value is Disable.
IPv4 address Enter the IP address for the encoder.
Default value is 192.168.1.70.
IPv4 subnet mask Enter the subnet mask for your network so the encoder will be
recognized within the network.
Default value is 255.255.255.0.
IPv4 default gateway Enter the IP address of your network gateway so the encoder
will be recognized within the network. This is typically the IP
address of your router.
Default value is 0.0.0.0.
MAC address Enter the MC address.
MTU (bytes) Enter a value between 500 and 9676. Default is 1500.
Preferred DNS server Enter the preferred domain name server to use with the
encoder.
Alternate DNS server Enter the alternate domain name server to use with the encoder.
3. Click Save to save the settings.
To configure PPPoE settings:
1. Click the Device Configuration > Network Settings > PPPoE Settings . The
PPPoE Settings window appears.
2. Check Enable PPPoE .
3. Enter your user name and password and confirm the password.