Interlogix TruVision DVR 12 User Manual - Manual (Page 106)

104 TruVision DVR 12 User Manual
– Or –
Click the Restore button. Enter the Admin password, click OK , and then click
Yes to confirm that you want to restore all parameters except network
settings to default.
Note: Network information, such as IP address, subnet mask, gateway, MTU,
NIC working mode, server port, and default route, is not restored to factory
default settings if Restore is selected.
Viewing system information
To view system information:
1. From the menu toolbar, click System Settings > System Information .
2. To view device information, click the Device Info tab.
3. To view camera information, click the camera tab.