Interlogix TruVision DVR 12 User Manual - Manual (Page 67)

TruVision DVR 12 User Manual 65
Chapter 9
Live view
Description of live view
Live view mode is the normal operating mode of the unit where you watch live
images from the cameras. The recorder automatically enters into live view mode
once powered up. On the viewer you can see whether a recording is in progress
and, if set up to do so, the current date and time, as well as the camera name.
Status information
Information on the system and camera status is displayed as icons on the main
and auxiliary monitors. The camera status icons are shown for each camera.
Each icon represents information on a specific item. These icons include:
Table 7: Description of the on-screen status icons
Icon Description
Indicates a sensor alarm.
Indicates recording (such as recording, motion detection, or alarm-triggered
recording).
Indicates a motion detection event.
Indicates a video loss event.
Indicates alarm and system notifications. Clicking the icon opens a window that
lists the alarms and notifications.
Indicates manual recording.
The recorder can display more than one icon at the same time. See “General
settings” on page 75 to display or hide these icons.
The system status is displayed on the front panel by the status LEDs.