Interlogix TruVision DVR 12 User Manual - Manual (Page 76)

74 TruVision DVR 12 User Manual
Configuring time and date
You can set up the date and time that will appear on-screen as well as on time
stamped recordings. The start and end time of daylight saving time (DST) in the
year can also be set. DST is deactivated by default. See Figure 20 below for the
Time settings screen.
Figure 20: Time and date settings window
Table 12: Description of the Time and Date settings window
Option Description
1. Time Zone Select the time zone of the recorder from the drop-down list.
2. Date Format Select the date format from the drop-down list. Default format is
MM-DD-YYYY.
3. Time Format Select the time format from the drop-down list. Default format is
12-hour format.
4. Display Week Display the day of the week in the monitor time bar.
Check the box to enable/disable. Default format is Enable.
5. System Date Define the system date.
Default date is the current date.
6. System Time Define the system time.
Default time is the current time.
7. Auto DST Adjustment Define DST is automatically. It depends on the time zone
selected.
Default format is Disable