Setting the unattended auto lock feature – iStorage diskAshur Pro SSD Manual User Manual

Page 10

Advertising
background image

10

Setting the Unattended Auto Lock Feature

To protect against unauthorized access if the drive is unlocked and unattended,

diskAshur PRO SSD can be set to automatically lock after a pre-set amount of time. In

its default state, the diskAshur PRO SSD Unattended Auto Lock feature is turned off. The

Unattended Auto Lock can be set to activate after 5, 10 or 20 minutes.
To set the Unattended Auto Lock please uses the following steps:
1. Enter the Admin mode by pressing and holding

UNLOCK + 0 for five seconds until

the LED flashes

RED

. This indicates that you can enter the Admin PIN.

2. Enter the Admin PIN and press

UNLOCK. The drive is in Admin Mode when the LED

has changed to solid

BLUE

.

3. Once in Admin mode, press

UNLOCK + 6. The LED should start flashing

RED

and

BLUE

intermittently.

4. Press one of the numbers below that corresponds to amount of time you would like

the drive to lock after no activity:

1=5 minutes
2=10 minutes
3=20 minutes
0=OFF
The Default is OFF for this feature.

5. After you have input the number, the LED should flash

GREEN

3 times to indicate

that you have successfully set the Unattended Auto Lock feature.

Advertising