About the diskashur pro ssd, Package contents, Travel pouch – iStorage diskAshur Pro SSD Manual User Manual

Page 4: Usb y-cable

Advertising
background image

4

About the diskAshur PRO SSD

Package contents

diskAshur PRO SSD drive

with integrated USB 3.0 cable

Travel pouch

USB Y-cable

Quick Start Guide

Looking for the highest level of

security for your data while utilizing

the fastest USB 3.0 speeds?

Look no further than the

diskAshur PRO SSD certified and

tested to NIST FIPS 140-2 Level

2 requirements and with ultra-fast

data transfer.

Sporting an easy-to-use keypad

design that is impervious to dust

and grit, with a software free setup

and operation, the diskAshur PRO

SSD enables you to access the

drive simply and easily with your

own unique PIN. And with a super

fast integrated USB 3.0 cable, you

can access your data faster than

ever before.

diskAshur

PRO

FIPS

Quick Start Guide

1

2

3

4

3

1
2

SHIFT button

UNLOCK button

LED Indicator lights

4

LOCK button

When you first plug in the

diskAshur PRO, the unit will do

a self-test to verify all security

components are working properly.

The LEDs will go through 3 test

stages

RED

,

GREEN

, and

BLUE

.

This will be followed by three

GREEN

flashes on a successful

test. Any test failure will leave the

unit in an interoperable state with

the

RED

LED flashing.

First Time Use

Before the drive can be used, the Admin PIN MUST be set. The LED will display Solid

BLUE

and Solid

GREEN

to indicate the diskAshur PRO is waiting for a PIN to be set.

To Set-up the Admin PIN:

1. Press

UNLOCK + 9. The LED will change to Solid

BLUE

and Blinking

GREEN

.

2. Enter the new Admin PIN and press

UNLOCK key. If accepted the

GREEN

LED

will flash for 3 short blinks, then return to Solid

BLUE

and Blinking

GREEN

.

3. Re-enter the Admin PIN and press the

UNLOCK key. If accepted the

GREEN

LED will be Solid for 3 seconds.

4. LED will then turn

BLUE

and remain in Admin mode for 30 seconds or if the

LOCK key is pressed, will return the drive to a standby state.

5. The Admin PIN is now set and will allow access to the drive or the Admin features.

6. To

UNLOCK the drive, exit Admin by pressing the LOCK button. Then enter the

new PIN and press

UNLOCK.

*Note:

PINs must be a minimum length of 7 maximum 16 digits.

Cannot contain all consecutive numbers (2345678 or 9876543)

Cannot contain all same number (1111111)

The

SHIFT key can be used for additional combinations.

SHIFT + 1 are a separate value than just 1.

PRO

®

Advertising