Cisco 2600 User Manual
Cisco Hardware
Advertising
Table of contents
Document Outline
- Release Notes for CiscoIOS Release12.0(7)XK1 Feature Packs forCisco2600 Series Routers
- How to Use These Release Notes
- What Is a Feature Pack?
- Memory Options
- Routers and Interfaces Supported
- Software Compatibility
- Product Number Quick-Reference List
- Feature Pack Overview
- Features by Feature Set
- Installation Notes
- Installing Software Images Using RSL
- Recovering From a Connection Error
- Restoring the Startup Configuration
- Step1 Ensure that all cables are properly attached to both the router and the PC.
- Step2 Restart the RSL, and connect by using the Preconfigured router option.
- Step3 When asked if you want to overwrite the existing startup configuration file, choose no.
- Step4 When asked if you want to continue, choose yes.
- Step5 When the router is connected, select Download Router Configuration in the RouterSoftware...
- Step6 Select the appropriate file, and click the radio button beside Copy configuration to the r...
- Installation Tips
- Alternatives to RSL
- Installing the Router Software Using the Console or Auxiliary Port
- Installing the Router Software Using a TFTP Server Application
- Step1 Install any TFTP server application on the PC. (A PC application is included on the featur...
- Step2 Launch the TFTP server application on the PC, usually by double-clicking the application i...
- Step3 Set up the PC as a TFTP server by using the TFTP server application setup or configuration...
- Step4 Establish a console session from your local PC (which is now configured as a TFTP server) ...
- Step5 Connect your PC Ethernet port to the corresponding router LAN port. Use the 10BaseT crosso...
- Step6 Enter the following commands to set the configuration register to 0x2101 and reload to the...
- Step7 When asked whether the system configuration has been modified, enter yes:
- Step8 If the password prompt appears, enter the password.
- Step9 At the router prompt, enter enable and then the password:
- Step10 If you are not upgrading a CiscoPro CPA1600 router, skip to Step19.
- Step11 At the router prompt, enter the following command to copy the router upgrade utility from...
- Step12 When prompted, enter the IP address of your PC, as in the following example:
- Step13 When prompted, enter the filename of the image to be copied to the router as in the follo...
- Step14 In response to the following prompt, enter the destination filename, and press Enter.
- Step15 When asked whether you want to erase the existing image in the router Flash memory before...
- Step16 Enter the reload command to reload the router:
- Step17 If the password prompt appears, enter the password.
- Step18 At the router prompt, enter enable and then the password:
- Step19 At the router prompt, enter the following command to copy the new software image from the...
- Step20 When prompted, enter the IP address of your PC, as in the following example:
- Step21 When prompted, enter the filename of the Cisco IOS Release 12.0(7)XK1 image to be copied ...
- Step22 In response to the prompt, enter the destination UNIX image filename, and press Enter.
- Step23 Enter yes in response to the prompt asking if you want to erase the existing image copy r...
- Step24 Enter the following commands to reset the configuration register to 0x2102.
- Step25 Enter the reload command to reload the router:
- Installing Software Images Using RSL
- Related Documentation
- Service and Support
- Obtaining Documentation
- Obtaining Technical Assistance