Monitoring | statistics | mib-ii | arp table, Refresh – Cisco VPN 3002 User Manual

Page 239

Advertising
background image

13-51

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 13 Monitoring

Monitoring | Statistics | MIB-II | ARP Table

Monitoring | Statistics | MIB-II | ARP Table

This screen shows entries in the Address Resolution Protocol mapping table since the VPN 3002 was
last booted or reset. ARP matches IP addresses with physical MAC addresses, so the system can forward
traffic to computers on its network. RFC 2011 defines MIB entries in the ARP table.

The entries are sorted first by Interface, then by IP Address. To speed display, the Manager might
construct multiple 64-row tables. Use the scroll controls (if present) to view the entire series of tables.

You can also delete dynamic, or learned, entries in the mapping table.

Figure 13-23 Monitoring | Statistics | MIB-II | ARP Table Screen

.

Refresh

To update the screen and its data, click

Refresh

. The date and time indicate when the screen was last

updated.

Advertising