ClearSounds IL95 - Manual (Page 4)

4 – ENGLISH 5 – ENGLISH
INSTALLATION
1 Unplug the handset cord from your telephone base. Insert this cord into
the jack marked “HaNDSET.”
2 plug one side of the short phone cord (included) into the jack marked
“BaSE.” plug the other end into the telephone base.
3 Set the compatibility Switch to the “4” setting. This setting provides
compatibility for most telephones
4 attach the ac power adapter to the IL95 (located on the upper left
hand side of the unit) and plug the other end into a working electrical
outlet.
5 pick up the handset. If you hear a dial tone, your IL95 amplifier is
installed properly.
6 Be sure to register your product online at www.clearsounds.com.
If you do not hear a dial tone or the person you are calling cannot hear you, consult
the telephone compatibility section.
IL-95.indd 4 5/28/08 4:24:47 PM