ClearSounds IL95 - Manual (Page 7)

6 – ENGLISH 7 – ENGLISH
FCC WANTS YOU TO KNOW
Your new product has been registered with the Federal communication commission
(Fcc). This product complies with standards in part 68 of the Fcc rules. The Fcc
requires us to provide you with the following information:
Connection and Use with the Nationwide Telephone Network
The Fcc requires that you connect your product to the nationwide telephone network
through a modular telephone outlet or jack. The modular telephone outlet or jack to
which the telephone must be connected is a USoc rJ-11c or rJ-11W. This equipment
may not be used with party Line Service or with coin Telephone Lines.
Notification to the Telephone Company
The Fcc requires that upon request of your local telephone company, you provide
the following information: a) The “line” to which you will connect the telephone
equipment (that is, your phone number), and b) The telephone equipment’s Fcc
registration number and ringer equivalence number (rEN). These numbers are on
the back or bottom of your telephone equipment. The rEN is used to determine how
many devices you may connect to your telephone line and still have them ring when
your telephone line is called. In most, but not all areas, the sum of all rEN’s should
be 5 or less. You may want to contact your local telephone company.
IL-95.indd 7 5/28/08 4:24:47 PM