ClearSounds IL95 - Manual (Page 9)

8 – ENGLISH 9 – ENGLISH
digital device, as specified in part 15 of the Fcc rules. These specifications are designed
to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation.
If your product causes interference to radio or television reception when it is in use, you
might correct the interference with any one or all of these measures: (a) where it can be
done safely, reorient the receiving television or radio antenna. (b) To the extent possible,
relocate the television, radio or other receiver with respect to the telephone equipment.
(c) If your telephone product runs on ac power, plug your product into an ac outlet that
is not on the same circuit as the one used by your radio or television.
INDUSTRY CANADA CS03 STATEMENT
This product meets the applicable Industry canada technical specifications. This is
confirmed by the registration number. The abbreviation, Ic before the registration number
signifies that registration was performed based on a Declaration of conformity indicating
that Industry canada technical specifications were met. It does not imply that Industry
canada approved the equipment.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connections. The customer
should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
IL-95.indd 9 5/28/08 4:24:47 PM