Cypress CDL-160ETH - Manual (Page 11)

9. Launch USB Server
Press “Launch USB Server ” icon from your desktop screen to connect
the DisplayLink USB to HDMI device and C-Media USB Sound Device. Once
connection completes, the status icons beside each driver will change from
GREEN to ORANGE as illustrated below.
Note: Doube clicking on the device driver toggles the status mode between
enable and disable.
Double click on the GREEN sign, the system will connect the devices
and after connect successfully it will turn to ORANGE sign. When connect
other devices with USB port, "Launch USB Server" will detect it and show out a
GREEN sign. Double click the GREEN sign to connect the device(s) in order to
activate and use it.
Note: This USB Server screen will appear only when input is from Ethernet.
When users wish to switch input from Ethernet to USB the Launch USB Server
must be disconnected before the switch. Skipping the disconnection step
may result in Launch USB Server's failure for the next time using.
7