Vertical Communications DX-80TM - Manual (Page 18)

DX-80 Digital Executive Telephone User Guide Page 15
3. If the extension you are calling is busy, the display shows:
EXT XXX BUSY
cbck msg next
4. Press [cbck]
5. You will hear a confirmation tone and the display will read
CBCK TO EXT XXX
6. Your extension will return to idle status.
To Answer a Call Back:
1. When the Call Back begins (called extension is now available), your
extension will ring a special Call Back alert ring for 30 seconds and the
display shows:
CALL BACK TO XXX
reply del
1.1. Lift the handset or press
Or…
1.2. Press [reply] to activate the Call Back.
To cancel all active Call Backs prior to receiving Call Back Alert
ringing:
1. Press
!,,
Call Park / Call Park Answer !73
This feature allows you to “park” a call at any extension. It is also used to
retrieve a parked call from any extension. You park and retrieve calls by
dialing the Call Park code (
!73
) followed by the extension number
where the call is to be/has been parked.
Operation – Park Call
1. While connected to an outside line call, press
!73
or press the
feature button designated as CALL PARK (if available).
2. Dial the extension number where this call is to be parked, or press the
DSS button of the extension where this call is to be parked.
3. The outside line call is parked at that extension.
4. Hang up the phone or proceed with other system functions.