Vertical Communications DX-80TM - Manual (Page 32)

DX-80 Digital Executive Telephone User Guide Page 29
hear tone ringing. After the alarm rings, it is automatically canceled. You
may program the alarm to operate one time or repeatedly. When
programmed for always, the alarm will sound at the same time everyday.
Operation - Activate
1. Press
!92
. The current time displays (NULL=none).
2. Press [chg] to enter a new alarm alert time.
3. Enter new time in “HHMM” 24-hour format (HH = hr, MM = min.)
4. Press [save]
5. Select [one], for a one-time alarm or [always] for repeated.
Operation - Notification
1. Alarm sounds and the display shows:
ALARM REACHED
ack
2. Press [ack] button to stop the alarm or wait for it to stop. (The display
will remain until [ack] is pressed.
Operation - Deactivate
1. Press
!92
. The current time displays (NULL=none).
2. Press [del].
Automatic Hold !94
If you are on a call and you press an outside line button, Automatic Hold
will automatically place the current call on hold. For instance, if you are
currently on a call on line 1 and you press line 2, the call on line 1 will be
placed on Exclusive Hold automatically. Similarly, if you are currently on an
intercom call with another DX-80 extension and you press an outside line
button, the intercom call will be placed on Exclusive hold. You do not need
to press Hold unless you want to place a call on System Hold.
Operation – Setup
1. Press
!94
.
2. You hear confirmation tone and the display shows:
AUTO HOLD ALLOW
3. The extension returns to an idle state.