Vertical Communications DX-80TM - Manual (Page 39)

Page 36 P7292 DETUG 09/01
2. Each active mode of forward will be displayed, e.g.:
BUSY FWD. XXX
del more
3. If you want to delete this forward, press [del]. Otherwise…
4. Press [more] for other active forward settings.
Caller ID (Standard on all CO Lines)
This telephone company feature requires a Caller ID (CID) service
subscription from the telephone company.
The DX-80 system will receive Type 1 Caller ID data from the telephone
company on all outside lines and will display this data on the LCD.
Operation – Options at a Digital Speakerphone
1. When an outside line with CID data has been answered, the left LCD
Interactive button can be used to toggle the displayed data between
Name received and Number received. An example follows:
LINE 5 00:44
JAMES SCOTT
2. Press the Left Interactive button to view the telephone number:
LINE 5 00:44
8135551401
3. Press the Left Interactive button to return to the name display.
Caller Identification Table – Callback !6,
Caller ID information for one hundred calls is stored in a CID Table. You
can review all call data, dial a stored number, or delete call data.
Operation
1. While the extension is idle (no active calls), press the CID Table code
!6/
.
2. Input the attendant extension password.
3. Press [show]. The display shows:
CID CALL TABLE
USE VOL +/- KEYS