Cognitive Solutions Advantage RFID Thermal Printer - Manual (Page 38)

P R I N T I N G R F I D T A G S
6. In the DOS Editor window, type the commands and data to
be sent to the printer.
7. On the File menu, choose Save.
8. In the Save As dialog, type a name for the file. Then, click
OK.
NOTE: The file name must be eight characters or less. The name cannot
contain spaces or symbols.
9. On the File menu, click Exit. This returns you to the
Command window.
10. At the prompt, type mode com1 9600,N,8,1. Press ENTER.
11. At the prompt, type copy filename com1. Replace filename
with the file name that you used in step three. Press ENTER.
12. The label prints on the printer.
Copyright © 2004, Cognitive. 33